Capital program · Operator-led · Multi-year capital plan
North Dakota Aviation Expansion Program
Multi-site aviation expansion across North Dakota, with EPC and owner's-engineer scopes covering process, mechanical, civil, and electrical packages.
Aviation Engineers · North Dakota
Aviation Engineers in North Dakota.
Licensed P.E.s, EPC contractors, and procurement intelligence for aviation programs across North Dakota.
Industry overview
Aviation engineering in North Dakota.
North Dakota is among the most active U.S. markets for aviation engineering, with a deep bench of licensed P.E.s, EPC firms, and specialty contractors serving operators, agencies, and developers statewide.
Aviation engineers serving commercial, general aviation, and airport infrastructure — airframes, propulsion, avionics, and FAA-regulated facility design.
VectorCore aggregates live North Dakota board records alongside claimable expert profiles so you can verify aviation credentials, locate active practitioners, and benchmark contractor capacity — without leaving the page.
Live · ND Board Records
Licensed engineers active in aviation across North Dakota
Loading live records…
Major projects
Active and recent aviation programs in North Dakota.
Representative North Dakota aviation programs where licensed engineers and EPC firms are currently scoped. Use this as a benchmark when sizing your own engagement.
Public infrastructure · State agency · Federally co-funded
North Dakota Aviation Corridor Upgrades
Permitting, design, and construction phase services on aviation-adjacent infrastructure backed by IIJA and North Dakota appropriations.
Greenfield · Private capital · EPC contract
Greenfield Aviation Facility — North Dakota
New-build facility on a North Dakota site, full aviation engineering from FEED through commissioning and startup.
Brownfield · Operator · MSA scope
North Dakota Brownfield Aviation Modernization
Retrofit and modernization at an existing North Dakota aviation facility — controls, electrical, mechanical, and structural upgrades under live operations.
Engineering disciplines
Disciplines that lead aviation work in North Dakota.
Aviation programs typically engage these P.E. disciplines. Each link opens the North Dakota specialty directory.
Aerospace Engineering · ND
Propulsion, structures, avionics, GNC and flight-systems engineering.
Mechanical Engineering · ND
HVAC, machine design, thermal systems, manufacturing process and equipment specification.
Electrical Engineering · ND
Power distribution, controls, lighting, instrumentation and electrical commissioning.
Civil Engineering · ND
Roads, bridges, water systems, land development and the public infrastructure that moves a city.
Contractor marketplace
EPC contractors and engineering firms for aviation in North Dakota.
Verified firms headquartered or actively delivering aviation scopes in North Dakota. Post a brief or contact firms directly — no broker, no fees.
No verified aviation firms claimed for North Dakota yet. Claim your firm →
Procurement information
How North Dakota aviation work gets procured.
The common contracting vehicles for aviation engineering and construction in North Dakota. Match your scope, schedule, and risk profile to the vehicle before issuing an RFQ.
North Dakota agency RFP / RFQ
Public-sector aviation scopes are typically procured through North Dakota agency RFP or RFQ vehicles, with pre-qualification and SBE/DBE participation requirements.
Federal IDIQ vehicles
Federally funded aviation programs (DOE, DOT, USACE, EPA) are commonly executed under IDIQ contracts with task-order pricing on North Dakota sites.
Master Service Agreements
Operators in North Dakota engage engineering and EPC firms under multi-year MSAs covering capital, sustaining, and emergency response aviation scopes.
EPC and EPCM
Greenfield and major brownfield aviation projects in North Dakota are routinely delivered under lump-sum EPC or reimbursable EPCM contracts with a single integrated team.
Owner's engineer
Owners retain independent aviation P.E.s in North Dakota for design review, constructability, schedule and cost validation, and on-site representation through commissioning.
Direct P.E. engagement
Smaller North Dakota aviation scopes — feasibility, study, peer review, expert testimony — are engaged directly with a licensed P.E. on a time-and-materials or fixed-fee basis.
Typical fee range
$aviation engineering fees in North Dakota typically run 4–10% of TIC for greenfield work and 8–15% for brownfield/modernization scopes.
Lead time
Expect 2–6 weeks from RFQ to a signed engagement for well-scoped North Dakota aviation work; complex EPC awards typically run 8–16 weeks.
Compliance
North Dakota requires P.E. licensure on sealed deliverables; firms must hold a North Dakota Certificate of Authorization where applicable.
FAQ
Hiring a aviation engineer in North Dakota
How do I find a licensed aviation engineer in North Dakota?+
Search VectorCore for P.E.-licensed engineers practicing aviation work in North Dakota. Every record links back to the North Dakota board for live verification.
Do aviation engineers need a North Dakota P.E. license?+
Any engineering deliverable submitted to a North Dakota authority, regulator, or owner must be sealed by a P.E. licensed in North Dakota. Out-of-state engineers must obtain North Dakota licensure (often via comity) before sealing in-state work.
What major aviation projects are active in North Dakota?+
North Dakota hosts a continuous pipeline of aviation programs across public infrastructure, private capital, and federally funded scopes. The "Major projects" section above lists representative active and recent programs by category.
Can I post a aviation project for North Dakota contractors and engineers?+
Yes — post a brief to the contractor marketplace and verified North Dakota engineers and EPC firms with aviation experience will submit proposals within 1–2 business days.
What procurement vehicles apply to aviation work in North Dakota?+
North Dakota aviation programs are typically procured through state-agency RFP/RFQ, federal IDIQ vehicles, master service agreements with operators, or direct EPC contracts. The "Procurement information" section above summarizes the most common paths.
Request for Quote
Send an RFQ for your North Dakota aviation project.
Describe your scope. We route your RFQ to verified aviation P.E.s and EPC firms licensed in ND. You'll hear directly from firms — no broker.
- · No fee to post · Confidential to each responding firm
- · P.E. verified · Licensed in ND
- · Typical first response within 1–2 business days